Antenna works well. I am in a bad spot - behind some wind turbines that operate 7a-7p. And there are some terrain problems. Still, I can usually get good signal from 65 miles away. After 8 months there was a problem with the small coax soldered between the antenna board and the junction box board on the rotor -the wire jacket and outer copper wire conductor were cut through all the way around. It is fixable (but a pain) if you rip it apart and solder in a new RG-178 or similar small coax. takes about 14- 16" to do the job. I suggest putting a little extra protection (electrical tape) on the cable where it passes through the plastic housing(s) - otherwise a good antenna for a good price.
by: Jonathan M.
by: Jonathan M.
Comments
Post a Comment